Get Your New Zip Line up With CTSC invaluable tool - The Tensioning Kit is designed to make installing a zip line and applying tension as easy as possible

Install Your Zipline In Minutes!!

The process is super-simple. Install your wide lanyard on the anchoring tree.

Use the cable puller to bring the cable to the correct tension. Use the cable clamp to connect the other end. Enjoy!

COME ALONG KIT FOR A MORE STRESS FREE SEP UP - CTSC CABLE TENSION KIT 660 lbs (300kgs) tensioning kit includes, CE & RoHS certified.

- wire rope puller w/ 4 ft spool of cable makes tesioning easily.

- strap 8.2' (2.5m) for wrapping around your tree or anchor

- cable grab for 3/16" (5mm) - 1/2" (12mm) cable bring zip line to correct tension so you can install cable clamps to complete installation.

Get your zip line installed with speed and efficiency.

Reminder and Important! !

Please follow this instructions - if you ratchet too much of your line, you may experience difficulty releasing the line. Do your best to lay the ratchet open and completely flat. If you cannot lay the ratchet flat, try pulling the gate and the spring loaded piece on the opposite side of the gate at the same time, pulling in opposite directions, please take this into consideration after purchasing this cable tensioning kit, thank you!

Zipline tensioning kit come along with ratchet strap crank ratchet to tension cables

Ratchet strap (zipline tensioning kit) easily crank to make cables tight Attach ratchet strap to END POINT, place a U clamp and hook grib to the main cable and secure with nut, crank ratchet to tension zipline. Cables will be easily cranked to be tight in a smart way.

If you have questions on tensioning of your ziplines please let us know and send a message to:

E-mail address: support@iziplineinc.com

Thank you!

Factory direct & Quality oriented!